The Horizon series also includes another two enclosure models, ENC2A and ENC2B. These enclosures are manufactured to provide safety to controllers, door units, and expansion boards of access control systems. The housing is made from strong SPCC/St12 cold-rolled steel, with cable entries via knockouts at various places on top, bottom, or sides. Besides this fact, it was made in such a way that there is enough space inside it where a 12V 7.2Ah/20HR battery can fit perfectly well, which will ensure that the access control system never goes off due to power failure because even if lights go out supply still remains steady. This particular feature allows continuous working without any breaks.


  • Multiple knockouts on top, sides, and bottom for conduit installation and cable organization
  • Three antenna connectors for WiFi and Bluetooth connectivity
  • LED indicators on the front panel show the system’s operational status
  • Cam lock and tamper switch for enhanced security

Technical Specs:

  • PMU-13V155WCCA@90-132Vac is the power supply model for ENC2A
  • The power supply output for ENC2B is 13.8V DC at 9.5A, with an input voltage of 13.3V/1.5A and a frequency range of 50-60Hz
  • This product has been certified to meet CE, FCC, and RoHS standards
  • There are four knockouts on the top of the enclosure that measure one inch in diameter, five on the left side, and four on the bottom
  • ENC2B’s dimensions are as follows: width –14.96 inches (380mm), height–20.08 inches (510mm), depth–4.73 inches (120mm)